Bluestar, keeps switching between phone and radio
Posted: May 27th, 2015, 6:34 pmRecently installed Bluestar in '04 Tahoe. Working OK initially. Added bluetooth music streaming via iSimple ISGM535 Aux adapter (GW adapter into XM port of stock audio), enabled AD2P & AVRCP profiles for Bluestar, seemed to work OK when first set up.
Now, phone functionality is unusable with vehicle:
- For incoming calls the radio display keeps switching between PHONE and the regular radio display(FM, AM, XM doesn't matter) every couple seconds, and the audio output changes accordingly from radio to ring-tone.
- For outgoing the steering wheel button puts the phone into voice dial mode, but the radio goes right back to playing so calls cannot be made.
In both cases the Bluestar breaks the Bluetooth link with the phone shortly afterwards and seems to be upset.
The same behavior happens with an iPhone 5 (ios 8) and a recent Android device. I've unpaired/re-paired both phones with no joy.
Any ideas ? The Bluestar is pretty unusable at this point.
Thanks.
Now, phone functionality is unusable with vehicle:
- For incoming calls the radio display keeps switching between PHONE and the regular radio display(FM, AM, XM doesn't matter) every couple seconds, and the audio output changes accordingly from radio to ring-tone.
- For outgoing the steering wheel button puts the phone into voice dial mode, but the radio goes right back to playing so calls cannot be made.
In both cases the Bluestar breaks the Bluetooth link with the phone shortly afterwards and seems to be upset.
The same behavior happens with an iPhone 5 (ios 8) and a recent Android device. I've unpaired/re-paired both phones with no joy.
Any ideas ? The Bluestar is pretty unusable at this point.
Thanks.