Page 1 of 1

Caller ID 2010 CTS Base

PostPosted: November 5th, 2013, 9:25 pm
by pbrewer2
Just installed Bluestar II in my 2010 CTS Base Sedan and everything seems to be working as advertised. The only problem I can see is that I'm not getting caller ID on the radio or the DIC, am I missing something or is this normal?

Re: Caller ID 2010 CTS Base

PostPosted: November 8th, 2013, 2:11 pm
by pbrewer2
A follow up to the previous post.

I completely removed the VCIM form the 2010 CTS, only J1 and J2 connectors and the two antenna leads were connected to the VCIM. I'm still not seeing the caller ID on the radio or the DIC. The radio does show a small telephone logo only. What should I be seeing.

Re: Caller ID 2010 CTS Base

PostPosted: November 8th, 2013, 10:36 pm
by Omlifecrew
Have you tested on both outgoing and incomming calls? I don't ever have caller id show when I make phonecalls. Only when the calls come in do I see caller id on the DIC only.

Re: Caller ID 2010 CTS Base

PostPosted: November 9th, 2013, 8:33 pm
by pbrewer2
I don't see caller ID on incoming or outgoing calls on the DIC or the radio.

Re: Caller ID 2010 CTS Base

PostPosted: November 17th, 2013, 9:00 pm
by sagoropen
hello,
Include you experienced on top of in cooperation gregarious in addition to inward bound identify? I don't increasingly encompass visitor identification demonstrate at what time I construct touchtone phone describe. Simply at what time the calls approach within perform I observe caller identification on top of the DIC just.
thanks :!: ...;